Lane Shark Hammerhead

The Lane Shark Hammerhead Brush Cutter (Model HH4) is a patented, hydraulically articulated, multi-position rotary brush cutter designed for tractor Front-End Loaders (FEL). It allows operators to hydraulically adjust cutting angles directly from the cab to efficiently clear overgrown trails, fence lines, and ditches

• • Cutting Diameter: 44 inches.
  • Unit Weight: Approximately 550 lbs.
  • Hydraulic Flow Range: 8.5 to 20 GPM (Gallons Per Minute).
  • Tractor Horsepower Range: 25 to 60+ HP.
  • Minimum Tractor Weight: 3,000 lbs (dry weight).
  • Minimum Tractor Width: 55 inches.
  • Cutting Angles: Vertical down to 25°–55° offset positions.
  • Mount Compatibility: SSQA (Skid Steer Quick Attach) and JD (John Deere) Hook & Pin systems.
  • Hydraulic Fitting Type: #10 ORB (O-Ring Boss).
  • Minimum Hose Size: 1/2-inch inner diameter. 

• • Hydraulic Articulation: Unlike older manually adjusted models, it moves from a flat home position to various cutting angles hydraulically using integrated cab controls.
  • High Efficiency: The 44-inch cutting swath slices through dense underbrush, heavy brambles, and small saplings, reducing manual labor times.
  • Extended Reach: The side-extension capability allows operators to cut steep pond banks, over hanging limbs, and over fences without driving the tractor into hazardous areas.
  • Included Accessories: Each unit comes standard with a proprietary switch box, along with pressure and return whip hoses to connect to the tractor loader bulkhead.
  • Origin: Proudly manufactured and assembled in the USA. 

• Third Function Required: The unit requires a dedicated hydraulic third-function system on the front loader for operational control.
• Incompatible Setups: The system is completely incompatible with rear remotes, diverter valves, stacked valve third-functions, and standard skid steers.
• Loader Priority: Utilizing unapproved diverter setups will cause a loss of primary loader priority during operation.
• Counterweight Recommendation: Due to the 550 lb offset weight, it is highly recommended to use rear wheel ballast or heavy rear implements to maintain stability while the cutter is extended.